Low Tide: 90 Ambient Presets for Bitwig's Own Polymer, Phase-4 and Sampler
Bitwig's own synths can sound wide and alive, but they rarely start that way. Low Tide is 90 native presets for Polymer, Phase-4 and Sampler, and how to play them.
It's late, and you've opened Bitwig to sketch an idea. You reach for a pad, and Polymer opens on a bare saw wave. Twenty minutes later, you've built something decent. It's static, though, and the idea you sat down with has gone.
So you try a plugin preset instead. It sounds great, but it's a third-party synth, and now the project won't open on your laptop, your collaborator doesn't own it, and the CPU meter is climbing.
Bitwig's own instruments are better than most people give them credit for. Polymer, Phase-4 and the Sampler can sound wide, alive and finished. What most Bitwig users don't have is a set of native starting points that already sound that way. That's the gap Low Tide fills.
→ Get EtherLoops Low Tide BW at shop.etherloops.com ($17)
What Low Tide is
EtherLoops Low Tide BW is a pack of 90 ambient and chillout presets built only with Bitwig Studio's own instruments: 64 for Polymer, 16 for Phase-4 and 10 for the Sampler. It has no third-party plugins and nothing extra to install. The wavetables and samples are embedded in the preset files, so every preset opens complete on any machine running Bitwig 6.1 or later.
I played every preset in a real project and tweaked it by hand before it went into the pack. The rules I tweaked by run through the whole set: dark filters you open with one knob, slow free-running movement, and effects already dialed in.
- 15 Pads and 8 Drones & Atmospheres
- 7 Generators, chord-driven patterns you hold and let play
- 4 Keys, 3 Plucks and 5 FM Bells
- 6 Basses
- 10 Arps and 10 Sequences
- 10 Sparkles, 7 Risers and 5 Impacts & Textures
The Polymer presets run on tables from EL Organic Wavetables Vol. 1. The Sampler presets run on my own recordings: pads and drones, a harp, a pluck, rain, particles, a bass, and a whale.
How to play it: five things to know
Every shot below comes from one small reference project: 85 BPM, D minor, five tracks, one 4-bar clip each. It's the same setup you'd use to audition the pack yourself.
1. Every Polymer preset has a Filter knob
The presets start dark on purpose. A pad that sits under everything is more useful than one that fights your lead. Every Polymer preset has a remote control labeled Filter on its Main page that opens the main low-pass from dark to bright. Map it to a controller, or draw a slow automation curve across a section. That one move is often all a build needs.
Pads and atmospheres also never sit still. A slow random modulator drifts the wavetable position, and a gentle auto-pan sits after the effects. Hold a chord and the sound keeps changing, the way a hardware pad does when you leave it running.

2. Octaves are one click away
Every preset, all 90, starts with a Note Transpose as its first note effect. If a pad sits too low under your bass, or a bell would work better an octave up, change it on the device. You don't need to touch the clip, the instrument, or the voicing.
3. Arps, generators, sequences and sparkles play themselves
The arps, generators, sequences and sparkles all have Bitwig's Arpeggiator built into the note chain. What you hold decides what you hear:
- Arps and Generators: hold a chord and the pattern plays it.
- Sequences: hold one root note and the preset plays its own melodic line. The scale is part of the name: ANY (root, fifth and octave only, so it works in any key), MIN, DOR, PMIN, MAJ, HMIN, PHR and LYD. For a D minor track, hold D on MIN Night Walk and it stays in key. The one exception is LYD Floating Bells, which follows your project key.
- Sparkles: hold a key for endless random glints, kept to octaves and fifths of the note you hold, so they never clash.

4. Risers land on the bar
Most riser presets either stop too early or keep sustaining past the drop. In Low Tide, each riser builds for an exact length locked to your project tempo, then cuts hard to silence:
- 4 bars: Glass Ascent, Storm Front, Tidal Lift, Dune Wind and Pulse Ascent
- 2 bars: Dust Ascend and Pump Climb
Start a held note on the bar where the build should begin, and it will stop exactly on the downbeat of your next section. A Segments modulator draws the shape. Because it runs in bars rather than seconds, it still lands if you change the tempo.

5. The Sampler presets use all five modes
The ten Sampler presets cover all five of the Bitwig 6 Sampler modes: Repitch, Textures, Spectral, Cycles and Fragments. Whale Song stretches a whale recording spectrally into a slow singing drone. Frozen Veil holds a granular cloud in place for as long as you hold the key. Cycles Deep Bass turns a bass recording into a stable, round single-cycle bass. Each one has a Perform page of macros: Filt Freq, Reverb, Formant (Spectral and Cycles only), Mod FX, Attack and Octave.

A few presets to start with
- Ember Veil (Pad): warm and veiled with a slow bloom. Put it under almost anything.
- Undercroft (Drone): dark, sub-heavy and glacially moving. Good for intros and breakdowns.
- Glass Cascade (Generator): hold a chord for glassy cascading 16ths.
- ANY Berlin Run (Sequence): a classic Berlin-school run that works in any key.
- Crystal Chime (Phase-4 Bell): a clear FM bell with inharmonic shimmer for top-line melodies.
- Deep Velvet (Phase-4 Bass): a round mono FM sub with a slight glide.
- Prism Dust (Sparkle): sparse glints trailed by delay. Hold it through a whole section.
- Rain Fragments (Sampler): a rain recording chopped into drifting fragments, for a textural bed.
The full list of 90 is on the product page.
What Low Tide doesn't do
- It needs Bitwig Studio 6.1 or later. The Sampler presets use the Bitwig 6 Sampler modes, so the pack won't load correctly in Bitwig 5.
- It's Polymer, Phase-4 and Sampler only. There are no Grid patches, FM-4 or third-party synths. That's the point of the pack, but it's worth knowing.
- Most sequences don't follow your key automatically. They're written in the scale in their name, so you choose the right one and hold your root. ANY sequences work everywhere; LYD Floating Bells is the one that follows the project key.
- Risers need their note to start on a bar. They count their 2 or 4 bars from the moment the note starts.
- It isn't a wavetable or sample pack. The tables and recordings are inside the presets to make them work. If you want the 50 tables for your own patches or other synths, they're sold separately as EL Organic Wavetables Vol. 1.
Installing
Unzip the download and copy the folder EtherLoops Low Tide BW into Documents/Bitwig Studio/Library/Presets/ (on Linux, ~/Bitwig Studio/Library/Presets/). Restart Bitwig or rescan My Library, then type EL or low tide in the browser search to see the whole pack. You can also drag any single .bwpreset straight onto a track.

FAQ
Do I need any plugins? No. Every preset uses Polymer, Phase-4 or the Sampler, all of which ship with Bitwig Studio.
Which Bitwig version do I need? Bitwig Studio 6.1 or later, on Windows, macOS or Linux.
Will the presets open on another computer? Yes. The wavetables and samples are embedded in the preset files, so there are no missing files.
How do I play the sequences in my key? Pick a sequence whose scale code matches your track (for example, MIN for a minor key) and hold the root note. ANY sequences work in every key.
Can I use the sounds in commercial releases? Yes. Anything you make with the presets is royalty-free for your own music and media, commercial or not, with no credit required. You can't resell or share the presets, wavetables or samples themselves.
Is there something free to try first? Yes: ArpSeq BW Free Starter has 20 free Bitwig Arpeggiator patterns.
Where to go next
If you'd like to build this kind of sound yourself, the tutorials How to Build an Evolving Ambient Loop in Bitwig Studio Using Only Native Tools and Generative Ambient Chords in Bitwig walk through the same ideas behind these presets: random modulators, held chords and patterns that play themselves.
If you'd rather start playing, Low Tide gives you 90 finished Bitwig-native starting points.
→ Get EtherLoops Low Tide BW at shop.etherloops.com
EtherLoops builds production tools for ambient, chill, and atmospheric music makers. Browse more at etherloops.com.